archaeological monitoring (less digging, more watching)

My day of archaeology might be a little different than what most of us signed up for when we stared doing archaeology. Today I’m working on an archaeological monitoring project for a road construction project. The excavation crew is installing a new water main and laterals to existing houses. Because the project is within the zone of a known archaeological site (two effigy mounds and a scatter of stone tools and other evidence of people) my job is to watch as the backhoe digs into the ground to make sure they don’t impact the mounds, uncover human remains, or disturb any other evidence of early human habitation. Basically I spend most of the day watching the crew install pipes, trying not to get hit by the backhoe, and trying to hold my own as the crew mocks my attempt to not fall into the open trench.

In the past, many mounds were destroyed to make way for roads, houses, and other such things. Now, state & federal laws require people like me to make sure the past is preserved. While it might not sound as sexy as other types of archaeology, it is important (plus, some might say I look dashing in a hard hat and safety vest….ok, no one has said that yet but maybe one day they will 🙂 ). I like being outside and sometimes get to use my training to identify bones that are found. In fact, the other day the crew unearthed a cow metacarpal, which was fun to show off.

I would say the best part of the job is getting to talk to the pipe crew and homeowners. The crew are often fascinated by archaeology and many of them bring me bones and other objects they have found over the years. Doing outreach is a major component of this work. While often times the crew doesn’t like me being in the way at first, I see one of my main jobs to be discussing the relevance of preserving the past (plus, I now know a hell of a lot about installing utility pipes and civil engineering!).

Archaeology: Watching Other People Dig

It’s an early morning for me, earlier than usual. I have two archaeology jobs these days – one as the webmaster for, and also my full time job working for a government agency in the northeast US. I wake at 4am and have just enough time to post some new archaeology jobs to the website, then it’s a quick rush to get ready for work!

I am adhering to the schedule of a subconsultant doing work on our property. An environmental company is planning a soil remediation project, essentially stripping away dirt that has tested as contaminated, and removing it from the site. Generally one thinks of archaeologists as the ones doing the digging, but today I will be watching someone else digging.

This is only my second week on the job, and the first time I’ve been in the field in a long time. I’m still learning the ropes at my employer and figuring out the right people to talk to, where to look up information, and even mundane things like where various equipment is located.

I’ve gathered the requisite equipment and spent time mentally preparing for the job at hand. Before you go into the field, there are certain steps that need to be taken. Part of the process is doing research on the area where you will be working. I needed to figure out what previously recorded archaeological and historical sites were in the vicinity of the project area, and what was found. Geographic information system (GIS) maps and site files are consulted in the search. Soil survey maps are also studied and can provide something of a preview of what you can expect to encounter. It’s important to also know the topography of a project area – is the landform flat, a severe slope, a hilltop? Related information is also important such as proximity to a water source (including seasonal water sources, or even one that existed only in the past). Some predictive models have been developed using those factors and other criteria to provide an educated guess on where sites may be found. Knowing something about the history of an area is also helpful. Is the project area near known Native American trails, or historic routes? Were structures present? What do we know about land use here in the last few hundred years? Archaeologists try to arm themselves with as much information as possible before an excavation ever occurs, however, you really don’t know what’s out there until you conduct fieldwork.

I did my homework, packed my truck, and headed out to the site to meet the contractors. I’m usually a bit obsessive about being early, but following a slow moving dump truck on dusty roads for miles and miles, I show up just on time. The contaminated soil is in association with a historic structure whose foundation remains. The contractors spend a bit of time debating the various methods of removing the soil, and I busy myself taking measurements  and photos of the ruins and proposed excavation. Nothing too exciting here from an archaeological perspective, even for someone enamored of historics like myself. Poking around the fill in the foundation turns up a few modern artifacts – sewer drainage pipe, PVC plumbing and plastics.

The excavator begins to strip the top few feet of soil, which is recent fill. I find a dark colored lens with charred wood in the excavated wall, likely a modern burn episode. The excavator operator is a local and informs me this is where trash was sometimes burned behind the structure. I ask more questions about the surroundings and compare the info given with my previous research. It’s often beneficial to hear what folks have to say, and sometimes you can obtain useful information. Any archaeologist who has been working in the field long enough can tell you stories about how a local informant clued them in to what was really going on (and usually where the real sites were).

The excavation comes to a halt, as there is a delay in bringing containers on site from another contractor. After spending time waiting for the containers to show up, the decision is made to cease operations for the day. I pack up and drive back to the office to write up my notes. The containers may not be arriving until next week, so I shift my attention to the next project and put this on the back burner for now. Shovel testing is planned for Friday at another site, and I need to complete my research before heading out. And so the cycle begins anew. Onto the next project!